Free Plans Sailing boat plans, Canoe and sailing boat kit suppliers Uk Epoxy Resins

Pram Dinghy Jacqui 2.3 metres long, 1.4 metre beam ( 7' 6" x 4' 6" )

Jacqui is an ideal starter to boat build it is built using the stitch and tape method of construction. The kit contains all your adhesive and coating materials, you will need to provide 3 sheets of 6 mm marine ply or good quality WBP exterior grade, some timber for the capping rails around the gunwale and for the seat supports. If you are building the sailing version 2 lengths of spruce for the mast and sprit. All lofted sizes are given on the drawing which is printed on an A1 sheet.
The dimensions for the spritsail are given and can be made cheaply using woven polyethelene

By buying the resin Kit and sourcing the plywood and timber yourself you can build this boat for around £135 for the sailing version

The kit contains the following

3.75 Epoxy resin and hardener	2 to 1 Ratio Pump set for measuring resin
0.5 kg High density filleting blend	25 metres Fibreglass tape 50 mm wide
5 off 12 mm laminating/glue brushes	1 pack Plastic cable ties for stitching
2 off 50 mm laminating/glue brushes	plastic squeegee.

A1 Highly detailed drawing sheet for "Jacqui"	UK Epoxy Resins instruction leaflet

To buy all of this in proprietary cut out kit form will cost you over £550 to build. Our Resin and Free Drawing/Kit is just £92.25 !!
Plans only £13.25 plus Vat and P&P email for details.

17' 6" x 2' 8" Sailing/Rowing Camping Canoe "Willie McGrath"

"Willie McGrath" Victorian Gentlemans Sailing Canoe

This is a sailing canoe with a difference, it has 5 watertight compartments and a reinforced mid section a 6' 6" long cockpit that you either paddle or row from. With the dagger board and rudder up it draws 4" fully laden. Fast under oars and fun to sail and with clear interior you can even sleep full length aboard, ideal expedition and camping boat. Great family project ! You provide the 4 sheets of 4 or 6 mm and a single sheet of 8 or 9 mm marine or exterior WBP plywood some small section Spruce or Douglas fir for the stringers. The timber used for the building Jig will be used to make both sets of masts and spars. Drawings for battened fan sails are provided they can be made simply and cheaply using woven polyethelene.

The full set of 4 A1 size drawings will be provided free with the Resin/ hardener Canoe kit.

To buy a smaller version of this style in a pre cut kit form would cost you over £1100 to build.
Our Resin and Free Drawing/Kit is just £184.50 !!

Plans only £35.00 plus Vat and P&P
email for details.

The Kit Contains the following:
7.5 Kg epoxy resin/hardener
2 kg filleting blend
Pump measuring set
Glass tape and glass fabric to sheath hull
Brushes and squeegee
Epoxy Instruction leaflet
4 A1 size ready lofted highly detailed drawings

10' 6" x 4' 9" Rowing Skiff "Tensix"

This boat can be made from 4 sheets of plywood 2 x 10 mm and 2 x 8 mm and some 2" x 1" for capping rails and seat supports. This boat is designed for hard work it has lots of in built buoyancy, it does not require a building jig.
Ideal for fishing or just pottering about moves well under oars and it will take a small outboard.

The Kit Contains the following:
7.5 Kg epoxy resin/hardener
1 kg filleting blend
Pump measuring set
Glass tape and glass fabric for sheathing
Brushes and squeegee
U K Epoxy Instruction leaflet
1 A1 size ready lofted highly detailed drawing

To buy a similar version of this boat in a pre cut kit form will cost you over £750 to build.
Our Resin/Drawing Kit is just £184.50 !!
Plans only £17.00 plus Vat and P&P
email for details.

15' 6" Canadian Canoe Resin Kit or Canoe Plans

To buy a similar version of this boat in a pre cut kit form will cost you over £750 to build.

Our Resin/Drawing Kit is just £124.00 !!

Plans only £25.50 plus Vat and P&P
email for details.

The Kit Contains the following:
3.75 Kg epoxy resin/hardener
1 kg filleting blend
Pump measuring set
Glass tape and glass fabric for sheathing
Brushes, cable ties and squeegee
U K Epoxy Instruction leaflet
1 A1 size ready lofted highly detailed drawing

You supply 3 sheets of 4 mm marine or WBP exterior grade ply and some 2" x 1" for gunwale and seat frames and a short length of 4" x 1" for the centre cross brace and rail spacers. The canoe will carry two adults with ease . Does not need a building jig drawing for paddles also included We supply the resin kit and a free ready lofted A1 size drawing

11' 9" Canadian Canoe Resin Kit or Canoe Plans

Click the image to see build process

To buy a similar version of this boat in a pre cut kit form will cost you over £700 to build.

Our Resin/Drawing Kit is just £124.00 !!

Plans only £25.00 plus Vat and P&P
email for details.

You supply 3 sheets of 4 mm marine ply and some 2" x 1" for gunwale and seat frames and a short length of 4" x 1" for the centre thwart . The canoe will carry a large adult with ease Ideal children’s boat . Does not need a building jig a drawing for paddles also included We supply the resin kit and a free ready lofted A1 size drawing

Click the image to se the canoe being built

This boat can be built with
3 sheets marine ply 4 or 6 mm thick
Plus a 1/4 sheeet for buoyancy tank seat tops
6 metres 20 x 40 mm Douglas fir
4 of by 5 metre 12 x 40 mm Douglas fir or
hardwood for gunwales.

Approximate weight using 4 mm ply=26 kg
Approximate weight using 6 mm ply=36 kg
Tools needed
Jigsaw
Power drill
Small plane
Sandpaper

The kit contains the following

7.5 kg Pack of Epoxy Resin and Hardener
1 kg of High Density Filleting mix
1 x 50 metre roll of woven glass tape
1 sheet of woven glass fabric for sheathing
1 pack of 2 squeegees
1 pack of gloves
1 set of Measuring Pumps
Mixing pots

Mixing sticks
1 pack of 5 brushes 12 mm
1 pack of 5 brushes 50 mm
1 pack of cable ties
1 litre of cleaning solvent
1 pack of mini roller inserts
1 mini roller frame
1 mini roller tray

Our Resin/Drawing Kit is just £190 !!

Plans only £30.00 plus Vat and P&P
email for details.

Two A1highly detailed drawings including full size templates for the curved plank ends, portage yoke and paddles.

You Supply

Materials List.

3 sheets of 4 or 6 mm Marine plywood
( You can use good quality exterior ply )

4 lengths 20 x 15 Ash or other hardwood 4.2 metre long
for the inner and outer gunwhales .

4 metre of 25 x 40 mm Ash or other hardwood for the seat frames

5 metre 20 x20 Ash or other hardwood for protective runners

16 metres of 40 mm wide webbing for the seats

Kit Contents

7.5 kg Pack of Epoxy Resin and Hardener
1 kg of High Density Filleting mix
1 x 50 metre roll of woven glass tape
1 sheet of woven glass fabric for sheathing
1 pack of 2 squeegees
1 pack of gloves
1 set of Measuring Pumps
Mixing pots
Mixing sticks
1 pack of 5 brushes 12 mm
1 pack of 5 brushes 50 mm
1 pack of cable ties
1 litre of cleaning solvent
1 pack of mini roller inserts
1 mini roller frame
1 mini roller tray

Our Resin/Drawing Kit is just
£190.00

Plans only £30.00 plus Vat and P&P email for details.

Two A1highly detailed drawings including full size templates for the curved plank ends, portage yoke and paddles.

14 ' 6" Dory Style Canoe the cheapest simplest way of getting afloat

Free Download A1 size ready lofted highly detailed drawing

Plans free to download just click the image above

You will need 2 sheets of 6 mm marine ply and some 2" x 1" for gunwale Does not need a building jig a drawing for paddles also included

15' 9" Overall length by 5' 2" Beam Dory Skiff " Morgan"

The Kit Contains the following:
15 kg of Epoxy resin/hardener
2 kg high density filleting mix
5 x 1" laminating brushes
5 x 2" laminating brushes
10 Mixing Pots
25 Mixing Sticks
5 pairs Latex gloves
Calibrated measuring pumps for resin and hardener.
2 Squeegees bevelled edge
10 Short pile rollers
1 Roller frame
1 Roller tray
2 rolls 50 mm x 50 metre fibreglass tape.
2 rolls 75 mm x 50 metre fibreglass tape.
2 x 5 metre fibreglass cloth ( Sheathing )
2 x 1 litre cleaning solvent.
Drawings: 2 A1 pages of ready lofted highly detailed Drawings including drawings of 9' dory oars.
U K Epoxy resins manual

Check out the project gallery
and watch "Morgan" being built
just click the image.

To buy a similar version of this boat in a pre cut kit form will cost you over £2100 to build.

Our Resin/Drawing Kit is just £384.00 !!

Plans only £42.50 plus Vat and P&P email for details.

You supply 6 sheets of 8 or 9 mm marine or exterior ply ( The outer hull is sheathed in woven glass fabric and epoxy) so exterior would be fine and the timber for capping rails, mast, sprit pole and boom. You should be able to save in excess of £1700 depending on the type of materials to decide to buy, The dimensions for the spritsail are given and can be made cheaply using woven polyethelene and If you need help we are only a phone call away

15' 6" Traditional Dory with Oar plans

Ideal fishing, picnic boat with built in Buoyancy or just rowing on the river

This boat can be made from 4 sheets of 6 or 9 mm marine or exterior plywood ( I used 6 mm exterior )
5 lengths of 75 x 15 douglas fir ( redwood ) 5 m long
1 length of 300 x 30 douglas fir ( redwood ) 1 m long
Oars 2 lengths douglas fir or spruce 60 x 60 x 3 m long
4 lengths douglas fir or spruce 30 x 60 x 750 mm long
23 metre 20 x 40 douglas fir
4 metres 40 x 40 douglas fir
This boat is designed for hard work it is ideal for fishing or rowing on the river it makes an ideal picnic boat,
it moves well under oars and it will take a small outboard This boat has lots of in built buoyancy and does
not require a building jig.

The Kit Contains the following:
7.5 Kg epoxy resin/hardener
1 kg filleting blend
Pump measuring set
Glass tapes and glass fabric for sheathing
Brushes and squeegee
U K Epoxy Instruction leaflet
1 A1 size ready lofted highly detailed drawing
Our Resin/Drawing Kit is just
£184.50!!

Plans only £19.00 plus Vat and P&P
email for details.